Beautilux professional nail sander

PROFESSIONAL NAIL SANDER

TO PRACTICE MANICURE, PEDICURE AND NAIL PROSTHESIS
IN A PROFESSIONAL WAY.
Model: DM-301

INSTRUCTIONS FOR USE

Read all safety instructions carefully before using the appliance.
Keep this user manual in a safe place for future reference.
1. Pen connection socket;
2. Bit holder;
3. Forward/reverse and pause;
4. ON/OFF and speed adjustment button;
5. Charging station;
6. Pen;
7. Pen holder;
8. Power indicator;
9. Speed ​​display.
FEATURES
1. Pen without tips, silent and vibration-free.
2. Powerful and strong, 35,000rpm with LCD speed display.
3. Forward/reverse switch and pause function.
4. Battery full recharge time: 2.5 hours, continuous use time: 12
hours.
5. Illuminated power indicator.
6. The 'holster' serves as a support for the handpiece or as a belt clip for the
pedicure services.
7. Battery capacity: 7.4V / 2600mAH.
8. Tip holder for more convenient use.
_________________________________________________________________________________________
1. Pen
a. To remove the bit from the sander, turn the chuck handle clockwise
clockwise until you hear the “click” to stop, then remove the tip.
b. To install the bit, ensure the chuck is in the open position, insert
completely insert the cutter into the chuck, then turn the chuck handle clockwise.
counterclockwise until you hear a “click” to stop.
NOTICED :
• Always clean the chuck and bit after use.
• Make sure the device is turned off before changing the tip.
• Make sure you have inserted your tip all the way in. Turn the clamping ring so that
to lock its attachment. If the tip is used before it is inserted and secured in
tightening the ring, this can be dangerous because it can come out of the location at any time
moment with rotation.
• After replacing the tip, it is necessary to test by pulling to ensure that the
chuck is securely locked.
• Do not turn the chuck while the machine is running.
• Never use bent, asymmetrical or damaged tips. Use
always compliant tips.
• Check that the tip stem is always clean before inserting it into the pen.
sander to avoid any dust contamination in the micromotor. Once
cleaned, insert your tip into the slot.
• We recommend that you leave a “test” tip in the sander when you
do not use it to ensure the longevity of the device.
_________________________________________________________________________________________
2. ENGINE
a. Connect the pen to the Pen Connection Socket of the control unit. Simply insert the
DC motor cable on both sides.
b. Use the ON/OFF and speed adjustment button to start/stop the engine, adjust
the speed while turning.
c. Forward/Reverse and Pause (button marked "F/R"): The motor stops when the button
is in the middle, and F for front, R for back.
d. The motor speed can be adjusted between 0~35,000rpm by the speed adjustment knob.
speed.
PRODUCT STRUCTURE
To protect the engine and control unit from excessive temperature rise
caused by overloads such as ball bearing failure and load
excessive strawberry temperature, a temperature sensor will be activated when the temperature exceeds
a predefined value, thus stopping the engine. When this protection system is activated,
Please turn off the machine. After more than 10 seconds, restart the device.
Specifications:
Troubleshooting :
Breakdown | Cause | Solution
• Engine fails to run
• Loose connection of the motor with the plug in the control unit | Plug in
correctly the motor cable
• Motor cable fault | Replace the motor cable
• Engine problem | Check the engine and repair it if it is faulty
• Motor stops suddenly in use
• Overload, or chuck open during operation | See protection system
safety. Check the chuck and close it if it is open
Controller
• Input voltage: DC 12V
• Input current: DC 0~12V/3A
• Rated power: 1.5A 60W
• Weight: 0.24 Kg
• Dimensions (mm): 139 L x 68 W x 25 H
Handpiece
• Torque: 335g.cm
• Max.RPM: 35,000
• Weight: 0.21 Kg
• Dimensions (mm): Φ 21 x 140 L
_________________________________________________________________________________________
ATTENTION
The safety instructions below should be read to avoid potential hazards.
which may result in personal injury or damage to the device.
1. This sander is intended for professional use only, for manicure and
pedicure.
2. Keep the sander and its base out of reach of children.
3. Install the appliance in a temperate room (0-40°C). Avoid any location
dusty or humid conditions which may damage the device.
4. Be careful to avoid falls and breakdowns. We do not offer any service of
warranty for damage caused by a fall.
5. Never plug/unplug the electrical appliance with wet hands so as
to avoid any electric shock.
6. Never use damaged electric cable to avoid electric shock.
7. Plug the appliance directly into a mains socket: avoid using
power strips that promote overheating of devices and do not guarantee your
security.
8. If your device reveals a malfunction: do not open it, do not try to repair it
repair it yourself. Return it to the store where you bought it to ensure the
SAV (after sales service). Only authorized stores in the Beautilux distribution network
are authorized to provide after-sales service so that the warranty works. We do not offer any
warranty service for a disassembled or modified machine.
9. Avoid getting water or other liquids on the sander or its base, as this could cause a
short circuit, abnormal heating or other problems due to rust
metal parts. We do not offer warranty service for damage
caused by liquid infiltration.
10. Turn off the device immediately if any liquid leaks. Inform the seller at
who you purchased from and request warranty service.
11. Store and use the device away from heat sources, such as direct sunlight.
sun or fire.
12. Always check for looseness, vibration, noise, temperature of
operation. If an abnormality is detected, immediately turn off the machine and
contact customer service.
13. Always place the pen on the stand to avoid falling, damage and other
potential dangers.
14. Always use the correct voltage, otherwise it will damage the machine.
GUARANTEE
1 year. We offer one year quality warranty for this machine. Please contact your
dealer to receive warranty service.
Warranty service will not be provided for the following situations:
• Damage caused by a fall.
• Liquid infiltration.
• Improper use outside of this instruction manual.
• Any modification or dismantling of the machine.